Shop headings: New Spares | Used Spares | Accessories | Brands
Black centre stand bracket for long Mistral silencers
Replaces left hand silencer bracket. Not suitable for V7 850 Special Edition
1 in stock
£25.00
INC VAT
£20.83 EX VAT
HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434.
Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
1 in stock
£160.00
INC VAT
£133.33 EX VAT
Exhaust gasket for standard downpipes
Composite gasket, see ENA85091 for less expensive alternative
This part is available by special order, request a quote
852090 MG852090
Also fits Aprilia RSV4, Aprilia Tuono V4, Aprilia RS660
£19.00
INC VAT
£15.83 EX VAT
Pair of long black finish reverse cone stainless steel performance silencers with special end caps from Mistral, the reverse cone design compliments the classic styling of the V7 models whilst the special end caps are an nice exclusive finishing touch. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
4kg lighter that stock silencers
Increased power
The ultimate V7 850 silencers
Euro 5 compliant
No remap required
Includes mounting brackets
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34383 if you have the Guzzi centre stand fitted.
Silencer shims not required
Release the music in your Guzzi!
This part is available by special order, request a quote
£870.00
INC VAT
£725.00 EX VAT
Pair of short reverse cone stainless steel performance silencers from Mistral, the satin finish reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
5kg lighter that stock silencers
Increased power
Euro 5 compliant
No remap required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34373 if you have the Guzzi centre stand fitted.
Silencer shims not required
Release the music in your Guzzi!
This part is available by special order, request a quote
£750.00
INC VAT
£625.00 EX VAT
Satin finish centre stand bracket for long Mistral silencers
This part is available by special order, request a quote
£25.00
INC VAT
£20.83 EX VAT
Satin finish centre stand bracket for short Mistral silencers
This part is available by special order, request a quote
£25.00
INC VAT
£20.83 EX VAT
Pair of long reverse cone stainless steel performance silencers from Mistral. The polished finish reverse cone design compliments the classic styling of the V7 models and the silencers are a similar length to the original silencers. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding pair of silencers.
4kg lighter that stock silencers
Benefit from increased power and torque
Release the music in your Guzzi!
Euro 5 compliant
No remap required
2BHP power increase at 5000rpm
No remapping required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34384 if you have the Guzzi centre stand fitted.
Silencer shims not required
Release the music in your Guzzi!
This part is available by special order, request a quote
£775.00
INC VAT
£645.83 EX VAT
Pair of long reverse cone black stainless steel performance silencers from Mistral. The black finish reverse cone design compliments the classic styling of the V7 models and the silencers are a similar length to the original silencers. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding pair of silencers.
4kg lighter that stock silencers
Benefit from increased power and torque
Release the music in your Guzzi!
Euro 5 compliant
No remap required
2BHP power increase at 5000rpm
No remapping required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34383 if you have the Guzzi centre stand fitted.
Silencer shims not required
Release the music in your Guzzi!
This part is available by special order, request a quote
£775.00
INC VAT
£645.83 EX VAT
Pair of long reverse cone stainless steel performance silencers from Mistral. The satin finish reverse cone design compliments the classic styling of the V7 models and the silencers are a similar length to the original silencers. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding pair of silencers.
4kg lighter that stock silencers
Benefit from increased power and torque
Release the music in your Guzzi!
Euro 5 compliant
2BHP power increase at 5000rpm
No remapping required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34384 if you have the Guzzi centre stand fitted.
Silencer shims not required
Release the music in your Guzzi!
This part is available by special order, request a quote
£775.00
INC VAT
£645.83 EX VAT